PF50 / amigo / II / Novio parts! Hard to find in the US

kozanatos · Post by **kozanatos** » Tue 28 Aug 2012, 06:18

Hello! My friend picked up a PF50. Not sure of its model name or year but we need parts! It is the two stroke model. The clutch ears snapped off because at one point somebody tried to run it and the cylinder was rusted in place. We have since free'd the cylinder and rings and cleaned them really well. Now we need some gaskets and the 2 clutch arms! We tried to have them welded but they are not real metal, just cast/pot metal.
Ears are broken right where the springs mount on the clutch pads.

They are considerably larger than a hobbits pads. The pf50 is like a early Hobbit/Camino from what I read. Its belt driven, then goes to a chain drive! It pivots though. pretty sweet. Tank is super clean and its just a sweet little ped, but no parts here in the usa!
In order of importance I need
2 clutch pads
Crank seals
Base gasket
head gasket
exhaust gasket
stock Rings / piston
points

Seals are universal and I haven't pulled them out to check the sizes- might be able to order them locally.

Story is the guy was a soldier in Belgian and brought it back with him in pieces. Has a few thousand miles on it but has been sitting for a long time.

Picked it up for a really low price too.

Please if you have access to parts sites in other languages let me know if you find what I need!

Post by **camino_expert** » Tue 28 Aug 2012, 18:21

kozanatos wrote:Hello! My friend picked up a PF50. Not sure of its model name or year but we need parts! It is the two stroke model. The clutch ears snapped off because at one point somebody tried to run it and the cylinder was rusted in place. We have since free'd the cylinder and rings and cleaned them really well. Now we need some gaskets and the 2 clutch arms! We tried to have them welded but they are not real metal, just cast/pot metal.
Ears are broken right where the springs mount on the clutch pads.

They are considerably larger than a hobbits pads. The pf50 is like a early Hobbit/Camino from what I read. Its belt driven, then goes to a chain drive! It pivots though. pretty sweet. Tank is super clean and its just a sweet little ped, but no parts here in the usa!
In order of importance I need
2 clutch pads
Crank seals
Base gasket
head gasket
exhaust gasket
stock Rings / piston
points

Seals are universal and I haven't pulled them out to check the sizes- might be able to order them locally.

Story is the guy was a soldier in Belgian and brought it back with him in pieces. Has a few thousand miles on it but has been sitting for a long time.

Picked it up for a really low price too.
Please if you have access to parts sites in other languages let me know if you find what I need!

http://www.benl.ebay.be/sch/i.html?_fro ... Categories" onclick="window.open(this.href);return false;
not easy to find parts for the pf 50 2 models
they are 3 models with the same motor amigo 2 -novio 2 and the honda canguru
grtz m

ps
you can ask camps kurt on the forum here

he has al lot of parst for the pf 50 types

kozanatos · Post by **kozanatos** » Wed 29 Aug 2012, 03:18

I sent him a pm!

Thank you! Ill continue doing parts searches on those models. I didn't know about the Kangaroo / Canguru

I might end up with it, Ill post up a few photos if I do.

Oah yeah, I could use a belt as well.

kozanatos · Post by **kozanatos** » Thu 30 Aug 2012, 04:35

Well i own the moped now

Still broken.

mhrfreak · Post by **mhrfreak** » Thu 30 Aug 2012, 22:31

i have a brand new original cilinderkit (oem honda)
with piston kit(orig.honda) for sale
also i think 5 brand new cilinders without piston kit

also the cover have i bran new (orig honda) also i think 5

pb if interested

kozanatos · Post by **kozanatos** » Fri 31 Aug 2012, 04:53

PMed you ~!

still - most important is clutches~

kozanatos · Post by **kozanatos** » Tue 04 Sep 2012, 06:38

Just for those wondering what it looks like!

I have the exhaust and floorboard also.

kozanatos · Post by **kozanatos** » Fri 07 Sep 2012, 03:51

I might have found some ! Woot woot!

kozanatos · Post by **kozanatos** » Wed 12 Sep 2012, 05:34

I opened up a blog because I wanted to document the work on something not really elaborated on. Not that they are complex, but not much info is posted online.

kozanatos · Post by **kozanatos** » Fri 14 Sep 2012, 07:17

Guess who got clutch pads !!!!!!!

Oli · Post by **Oli** » Fri 14 Sep 2012, 21:57

Nice project. Keep u the good work

kozanatos · Post by **kozanatos** » Mon 08 Oct 2012, 06:10

New updates!!!
Check it out like Speedy Gonzalez

kozanatos · Post by **kozanatos** » Tue 23 Oct 2012, 08:48

Video up now!

Not much but there will be more.

" onclick="window.open(this.href);return false;

HondaCaminoTuning.be

Please disable your adblocker on this website!
The website costs are covered by using ads that are non-intrusive. Please whitelist this domain in your adblocker software or plugin. Thank you.

Schakel alstublieft de adblocker uit!
De kosten van het hosten van de website worden betaald met advertentie-inkomsten. Voeg alstublieft een uitzondering toe voor dit domein in de software of plugin.