Where can I purchase a driven pulley for a Camino?

JCampbell · Post by **JCampbell** » 14 Mar 2009, 07:16

Hi everyone,
I own a 1978 Honda PA50II Hobbit or Camino as marketed to the rest of the world...
Here is my setup: (I'm also gonna try to attache a picture of it)
70cc Parmakit
engine cases matched to Parma
21mm Malossi Intake
21mm Dellorto PHBG with Malossi air filter
Modified/Dremeled reed plate
Boysen Power Reeds
Malossi racing gears
TJT Maxivar variator for Derbi Variant
Mag wheels from Belgium
Long seat from '83 PA50
Puch levers
Puch Headlight
Low bars
Yellow cables

I need to purchase a rear drive pulley because mine is shredded inside and does not return closed properly.
I would like to buy one new if possible and I'm willing to pay accordingly.
If you can help me I'd appreciate it very much.
J

klainstain · Post by **klainstain** » 14 Mar 2009, 11:07

Nice camino !

In Belgium American wheels are rare, but there you use wheels from Belgium :')

My English is not very good, but I think you search for this piece?

http://www.2dehands.be/gestraalde-3-of- ... gestraalde
That's the one on the front (the left piece)

Or this?

http://www.kapaza.be/Brommers_en_scoote ... amino.html
The complete front

Or this?

http://www.kapaza.be/Brommers_en_scoote ... amino.html
The one on the back?

Greetings

killingsnake · Post by **killingsnake** » 14 Mar 2009, 11:13

Now, that is a very nice setup! I'm really impressed!

Contact Guy (Quartzsp is his nickname on this forum). Send him a private message. He is a Moped dealer here in Belguim, he probally has the largest collection of Camino parts in belguim, and i know he exports to the US to.

JCampbell · Post by **JCampbell** » 14 Mar 2009, 16:56

Thank you for the comliments.
The driven pulley I'm looking for is just like this one:

Also forgot to mention one of the best parts of my Honda... my exhaust pipe!
It's a N8P for Hobbits built by Motomatic Mopeds of Sacramento, California.
It's the best pipe for Hobbit/Camino that I've ever tested.
Better than the Proma Circuit or the LeoVince...

I will try to contact Quartzsp... if I can find his contact information...
Thanks again,
J

klainstain · Post by **klainstain** » 14 Mar 2009, 18:03

Or you can buy this one

http://www.camino-parts.nl/?menu=articl ... ID=5415528

clio-tuning · Post by **clio-tuning** » 14 Mar 2009, 18:10

klainstain wrote:Or you can buy this one
http://www.camino-parts.nl/?menu=articl ... ID=5415528

Thats only the front... not the complete pulley...

killingsnake · Post by **killingsnake** » 14 Mar 2009, 18:19

I find that an extreme expensive e-shop

JCampbell · Post by **JCampbell** » 14 Mar 2009, 18:24

Thank you for that link.

That is what I need to purchase, but I can't read anything on that website.
SUCKS!
There is no way I can order if I can't read it...

Somebody who can read it, buy the pulley, and I'll buy the pulley from you!
That's brilliant huh?

I don't care if it seems expensive. I'll pay whatever it takes to get my bike perfect again...
J

JCampbell · Post by **JCampbell** » 14 Mar 2009, 18:25

Oh, I did not see that it was only part of what I need...

I need the entire pulley.

My hub is fine, it's just the rear driven pulley I want...
J

klainstain · Post by **klainstain** » 14 Mar 2009, 19:17

And do you want it new?
Cause Clio-tuning (moderator) has got the entire pulley's (overhauled)

Maybe you want he want's to send it to you?

JCampbell · Post by **JCampbell** » 14 Mar 2009, 19:43

I would like new.
But I would buy a used pulley if it were in EXCELLENT condition.
I would like it to be from a late model Camino...

I will try to contact Clio-tuning.
Thank you.
J

clio-tuning · Post by **clio-tuning** » 14 Mar 2009, 20:41

Maybe I can buy a new one at the local Honda shop.

Preview:

Cost about 80 euro (exclusive shipping to the USA)

JCampbell · Post by **JCampbell** » 04 May 2009, 18:48

I am still looking to buy a NEW rear pulley for my Hobbit.

The one pictured above would be perfect!!

Please PM or email me at [email protected]

I can paypal you for a new pulley immediately!

Thank you in advance for your help...
J

P.S. - I recently bought a 47.6mm Athena kit and I love it. No more parmakit for me!

JCampbell · Post by **JCampbell** » 14 May 2009, 03:43

Got a brand new pulley on the way from Clio-tuning...
Super excited

Thanks again clio-tuning!
J

clio-tuning · Post by **clio-tuning** » 14 May 2009, 05:22

JCampbell wrote:Got a brand new pulley on the way from Clio-tuning...
Super excited

Thanks again clio-tuning!
J

No problem mate!
It was the last...

HondaCaminoTuning.be

Please disable your adblocker on this website!
The website costs are covered by using ads that are non-intrusive. Please whitelist this domain in your adblocker software or plugin. Thank you.

Schakel alstublieft de adblocker uit!
De kosten van het hosten van de website worden betaald met advertentie-inkomsten. Voeg alstublieft een uitzondering toe voor dit domein in de software of plugin.